open-source-rover

open-source-rover copied to clipboard

toebes

There is a problem with the location of the drawing holes, resulting that the Control Board can not be installed. https://github.com/nasa-jpl/open-source-rover/blob/master/mechanical/body_assembly/laser_cut_parts/top_plate_baseline.dxf 

SallyTYT

https://github.com/nasa-jpl/open-source-rover/blob/master/parts_list/master_parts_list_raw.csv https://github.com/nasa-jpl/open-source-rover/blob/master/mechanical/body_assembly/3d_printed_parts/pvc_hub_lower.stl

SallyTYT

[Bug Report] PCB Assembly Readme.md: Controller Board's JST connector needs to be connected backwards

6

The opening in the pins on the JST connector should face OUTWARD as shown below.  https://github.com/nasa-jpl/open-source-rover/tree/master/electrical/pcb_assembly#362-solder-40-position-headers-2

SallyTYT

Rev 2.0 - PCB updates

52

1. Resolves issue #187 regarding test point T3 and duplicate 16 connectors. Renamed connector to J28. Connectivity unchanged. Documentation updated to refer to J28. 2. Removed extraneous trace described in...

dcschooley

without videos

JHPHELAN

Add Sinuhe's and Alex' builds

1

Achllle

Fix a link to a GitHub.com directory listing. So the link is not broken when the documentation is built with MkDocs #360.

sethfischer

Format Markdown with markdownlint. VSCode extension: DavidAnson.vscode-markdownlint VSCode extension code: https://github.com/DavidAnson/vscode-markdownlint Command-line tool: https://github.com/DavidAnson/markdownlint Closes #362

sethfischer

Update calibration.md

1

Updating Calibration document based on user feedback

ericjunkins