python-broadlink

python-broadlink copied to clipboard

I have learned my Home Assistant installation the IR codes of the Amino Aria 710 settop box through the Broadlink integration and also through the cli tool broadlink_cli.py. I'm using a Broadlink RM Pro +. When sending the command for example for channel up just once, the stb goes correctly one channel up. When sending the same command again, the Broadlink seems to send the IR codes multiple times, because the stb goes up a couple of channels. This problem exists when sending the IR code with Home Assistant and when using the cli tool broadlink_cli.py.

HA: 2022.11.1 Supervisor: 2022.10.2 Operating System: 9.3

python-broadlink was installed through pip3.

A snippet of the config in HA:

"tvbox": { "kanaal-omhoog": "JgDGAFcdEA4PDRAcDx0rHRANEA0QDg8ODw4PDh4cDw4QDRANHg4PDg8cEA0fGxAOHg0QHA8ODw4eHA8OEA0QDRANEAAI0FgdDw4PDhAcDxwrHg8ODw4QDRANEA0QDR4cEA0QDRAOHg0QDRAcDw4eHBANHg4PHBANEA0fGxAODw4PDg8ODwAI0VgcEA0QDRAcDx0rHRANEA0QDRAODw4PDh4cDw4PDhANHg4PDg8cEA0fGxAOHg0QHA8ODw4eHA8OEA0QDRANEAANBQAA", "kanaal-omlaag": "JgDAAFcdEA0QDRAcDxwtHBANEA0QDRANEA0QDR8bEA4PDg8OHg0QDRANEBweHBANHg4PHBANEA4eHA8ODw4PDh4ACN9YHBAODw4PHBAcLBwQDg8ODw4PDg8ODw4eHBANEA0QDR4ODw4PDhAbHxwPDh4NEBwPDhANHhwQDRANEA0fAAjfVx0QDRANEBwPHC0cDw4QDRANEA0QDRANHxsQDg8ODw4eDRANEA0QHB4cEA0eDg8cEA0QDh4cDw4PDg8OHgANBQAAAAAAAAAA" }`

The same IR codes when saved by broadlink_cli.py in a file:

tvbox-channelup: 2600c600581c0f0e100d101c0f1d2a1e0e0f100d100e0f0e0e0f0f0e1c1e0f0e0f0e0f0e1e0e0f0e0f1c0e0f1e1d0e0f1e0d101c0f0e0f0e1c1e0e0f0f0e100d100d100008d0581d0e0f0f0e0f1d0e1d2a1f0e0f0f0e0e0f0f0e100d0f0e1e1c0e0f100d0f0f1b100f0e101c0e0f1e1c0e0f1e0e0e1d0f0e100e1c1e0e0f0f0e0f0e0f0e0f0008d1581c0e0f100d101c0e1e2a1e0e0f100d100d100e0e0f0f0e1e1c0e0f0f0e0f0e1e0e0f0e0f1c0f0e1e1c0f0f1e0d0f1d0e0f0e0f1e1c0e0f0f0e0f0e0f0e0f000d050000

tvbox-channeldown: 2600c000581c0f0e100d0f1d0f1c2e1b0f0e0e0f0e0f100d100d0f0e1f1c0f0e0f0e100d1e0d0f0e110c0f1d1e1c0f0e1f0d0f1c100d100e1d1d100d0f0e0f0e1d0008e0581c0f0f0e0f101b0f1d2b1d110d100d0d100d100f0e100d1d1d0f0e0f0e100d1e0e0f0e0f0e0f1d1c1e0f0e1d0e101c0f0e0e0f1c1e0f0e100d0f0e1e0008e0581c0f0e0e100f1c0f1c2c1d0f0e100d100d100d100d100d1f1c0f0e100d0f0e1e0d0f0e110c101c1d1d0f0e1e0e0f1c100d0f0f1e1c0f0e100d0e0f1d000d050000000000000000

Please let me know if I can do anything to solve or debug this problem.

The same by me. And then after some time RM4 Pro reboots

Same issue here.

I also have this problem. RM4 Pro.