JLCKicadTools

JLCKicadTools copied to clipboard

Hi Matt, I received the cbs last week and i have been working on the code. Yesterday I started testing the relay and i could not get it to switch. I checked that the NC was working but the NO did not work. I reviewd every component of that part of the circuit and i think the culprit is the relay. It is placed reverse. the coil side is 180 degrees opposite of it should be.

I had add it this line to the ritation file:

"^Relay_DPDT_Omron_G6K-2F",-90

because originally was placed perpendicular, I guess i should have one: "^Relay_DPDT_Omron_G6K-2F",90

Just wanted to give you a head's up. I am working through the pcb and i expect to make the next version in a couple of weeks.
Will send you an update once i have verified that this correction fixes the problem

thanks

Thanks for the heads up. I have reverted them for now. Let me know if that works!

all the other ones are ok, the relay is the only wrong one.

Sent from my iPhone

On 23 Mar 2021, at 11:06 am, Matthew Lai @.***> wrote:

 Thanks for the heads up. I have reverted them for now. Let me know if that works!

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.