Reflow-Controller

Reflow-Controller copied to clipboard

Added a component source file to translate the BOM into manufactures and suppliers part numbers. Note not all parts could be found

Assistedevolution

Compiling issue

1

First of all, thanks for sharing your project. I am struggling to compile the code because is returning this compile error: > Archiving .pio\build\esp32dev\libFrameworkArduino.a > Linking .pio\build\esp32dev\firmware.elf > xtensa-esp32s2-elf-g++: error:...

albimazzu

BOM and Gerber files

3

Great project and thanks for sharing. I know this is still work in progress but do you have a BOM and maybe Gerber files for this project? Cheers

Assistedevolution

Reflow Timer

2

Hello, I have another issue this time related to the reflow process. My oven needs more time to get up to temperature. In tests, my oven temp follows the set...

thurstinn

OLED Display

13

Hey, thanks for the upload. I have designed my own board with your schematics. I have checked and re-checked and I know that everything is correctly routed and assembled. I...

thurstinn

Documentation enhancement: ESP32-S2Fxx is required not ESP32-S2

4

I ordered an esp32-s2 without thinking much about it but after not being able to flash the chip at all I transfered another "S2" from a dev board. That fixed...

Quas7

Hi, Why use 2 temp sensor? I looked at the code and noticed that you only used the temp1 sensor. What is the purpose of the second sensor?

berkin88

Mention what Thermocouple you use

1

Hello, I have the exact same setup as you did in your video, but my meassured temperature lags behind significantly. My best guess is, that my thermocouple takes way to...

HiddenTr0ll

U3 - RT9193 - BP Pin left floating while datasheet especially states not to do that

3

Hi ! As the title says. In your schematics, you leave the BP-Pin of IC U3 (RT9193_SC70-5) floating. If you have a look at the datasheet of the RT9193 (https://www.richtek.com/assets/product_file/RT9193/DS9193-18.pdf),...

p1ngb4ck