jorisc90

I'll try to get a good screwdriver set and read out what is happening. Will update the thread as soon as I get some output.

Hi all. Just opened up my second unit (this time without breaking the case :-) ) and collected the logs. They are attached. Seems the unit hangs in the bootloader...

By attaching the USB --> serial (UART) converter to the S20 (soldered on the pins), then opening a Putty session with logging on the USB COM port; baud rate set...

Same behavior as here. Dots just keep going. Op wo 6 dec. 2017 22:04 schreef Matthias Kleine : > Mh thats really strange. I am getting the exactly same output...

I'll keep mine delidded for now. No final use case for it anyways :-) Will flash the new FinalStage when ready.

Just uploaded the new firmware and tried again, to no avail. The output from the serial changed a bit, but the loop encountered remains for now. Attached the logs from...

Thanks for your update and the time spent :-) I'm on training this week so don't have physical access to the S20 either. I don't have the time resources to...

Going to flash wired as well. Thanks for updating. @sillyfrog please send me your address details for a belated christmas gift :-)

> Log out off the MyDyson app and try again, it solved the problem for me. This solved the issue for me! Thanks mjtweb!