qdmr
qdmr copied to clipboard
A GUI application for configuring and programming cheap DMR radios under Linux and MacOS X.
For roaming channels color codes have not to be set (value is 16 = 0x10 = "No Use"). In the channel list this is treated correctly but not in the...
Using version 0.10.2 on Lubuntu. On prior versions of qdmr I've been able to read from and write to this radio without issue. When using 0.10.2 qdmr did not completely...
Hi. When pushing a codeplug with analog channels and DCS code, the DCS code is'nt pushed on the radio. If i configure the DCS directly on the radio, qdmr is...
My radio (DMR 6x2) finds dual use on ham bands and commercial radio bands in the US, where we are permitted to use encryption on commercial. Is there any plans...
Yes, another New Device issue! This radio looks similar to the AnyTone 878UV and friends. http://members.optuszoo.com.au/jason.reilly1/868mods.htm#MD5similarities Right now qdmr detects it as an unsupported AnyTone model, then crashes. Here's the...
This device actually identifies itself as a D578UV2, V100. So I will call it that way internally. The device is likely very similar to the D578UV and thus the existing...
I have a radioddity gd73. How can I get support. Are there any tests I can do to contribute?
Likely a different hardware revision to the AT-D878UV running the same firmware (?). If so not much needs to be done: - [ ] **Get wireshark capture of codeplug read,...
The radio is very similar to other TyT/Retevis radios e.g. TyT MD-UV390. To this end, it is very likely that only the codeplug must be verified. As the binary codeplug...
I'd quite like support for the [Retevis RT72](https://www.retevis.com/shop/Retevis-DMR-Dual-Band-GPS-radio-RT72/#A9185AX1-J9143AX1-C9054AX1). I do have one of these radios and could do testing/provide information as required.