DB25M Pin 14 Does not match Schematic

It looks like Pin 15 is swapped with Pin 14 for the DB25M part between Schematic and Breadboard view.

Using v 0.9.3 - updated all parts

Example Schematic - Pin 14 to 5V, Pin 15 to GND via 220ohm resistor:

Switch to breadboard: Resistor is connected to Pin 14 rather than 15:

Example: fritzing wrong pin.zip

Originally raised in https://github.com/fritzing/fritzing-app/issues/3431

Confirmed in the parts editor. Pin 14 on schematic is definitely mapped to pin 15:

The issue itself is easy to fix, but the part obsoletion process must be verified for this case where only the svg is changed.

Thanks @KjellMorgenstern - anything you need from me?