modular-psu
modular-psu copied to clipboard
eez-open
EEZ Bench Box 3 (BB3) Modular T&M chassis
I'm not sure this is something that actually needs to be actioned, but thought I'd open an issue to get your thoughts, and have it available here on github. (This...
**IMPORTANT: Only some BB3 kit version with 2 Mean Well LRS modules seems to be affected by this issue!** R4 is located on the AUX-PS module r3B3 that looks like...
Wonderful project. Any timeline on the four-quadrant modules?
The 5 pin connector of the DCP405 front panel is not flat with the front side of the panel (is is recessed). This works fine for the supplied push-in connector,...
Hey, in [dcm220/BOM/1-click-bom.csv lines 55-56](https://github.com/eez-open/modular-psu/blob/master/dcm220/BOM/1-click-bom.csv#L55) the MPN columns seem to shift the distributor columns over.
Make the rprog (voltage or current) honor the Vset/Iset limits. In normal operation I always set things low to avoid magic smoke. With prog currently the voltage limit is completely...
This was discussed on the EEVblog [here](https://www.eevblog.com/forum/projects/eez-h25005-a-possible-successor-of-eez-h24005-programmable-power-supply/msg3411354/#msg3411354), and Discord [here](https://discord.com/channels/511131497801973761/511133610556784640/824318110218977370) but the BB3 will oscillate between CC and CV modes while charging a battery when the battery voltage gets within...
To power small auxiliary extension that are connected to the BB3 it is usefull to have an additional port or make explicit which port power can be drawn from. These...
https://github.com/eez-open/modular-psu/tree/master/mcu/KiCad are obsolete they use EEZ DIB MCU r1B2 when official latest version (Eagle files) is EEZ DIB MCU r1B6 It will be great to add details in the [mcu/README.md](https://github.com/eez-open/modular-psu/blob/master/mcu/README.md)...
