modular-psu-firmware
modular-psu-firmware copied to clipboard
eez-open
Firmware for EEZ Bench Box 3 (BB3)
Using 1.8.Alpha2 .When running either DCpowerapp or Relay test app if you open the input keyboard and use the slide to adjust feature this resets the BB3 in non-interactive mode....
Reported by Mike G on Discord > The problem is that when you leave the app the BB3 reboots through he welcome page and removes the auto script setting. Would...
With the following settings in function generator: DCP#2, DOUT1, AOUT1 all to pulse, 200ms period, 50ms pulse width:    When I turn the output on, this is shown...
The current development version of the firmware (1.8) is not compatible with the V2 resource files for python scripts generated with studio that are being used with versions 1.8 -...
Add applet description as we already have it for MicroPython script.
Pressing the cross (x) at the lower right corner restarts the BB3 with latest 1.8-alpha2 firmware on BB3 with MIO168:  Seem to happen independent of DLOG file loaded, also...
Background: When working with analog signals, these signals often correspond to a measurement (e.g. sensor) or other physical setting (e.g. speed, angle, temperature, ...). Most of the time the relation...
The front panel current readout for the DCP405 is unstable with a noisy load. This is the shape of the current load waveform, from a stepper motor driver:  It's...
When driving a noisy/peaky load like a stepper motor driver, the DCM224 front panel current readout isn't consistent. Here's a short video showing the issue: https://www.dropbox.com/s/r5a9zkj52qxuub2/2021-11-02%2017.54.50.mp4?dl=0 Clearly the power calculation...
Using '(101)' as channel doesn't generate an error. It should. 