David Buezas

Worked?

I'm in doubt. I want to get short pulses whenever there is movement instead of a long 3 second pulse. Replacing C2 with a smaller cap like @imayoda proposes worked...

Thanks for the comprehensive answer! > * retriggerable=false (not mandatory, might even be smarter to have retriggerable=true as long as your pulse duration is really short) Why smarter?

I wanted to give FT Motion a try and found (5/July/2024 bugfix 2.1.x): * FTMotion ON: Steppers make noises skip and generally behave weirdly (I think the acceleration stage is...

Isn't this practically solved by x-y hole and contour compensation?

I mean, it used to fit only the .3mm tolerance, with x-y hole compensation set to 0.15mm it is spot on. (although I agree that Cura's tolerance seems less of...

I mean xy-hole (and xy contour) compensation, not xy-size compensation

I'd suggest you do this: 1. print an orca tolerance test 2. see where the printed pin fits as tight as you wish tolerances to be 3. Divide the number...

Isn't it equivalent to "x-y hole compensation" and "x-y contour compensation"? Or rather, those are even more flexible. I use those instead and don't have issues with threaded parts.

In the integration click configure for the device of interest and enable experimental entities. You'll get switches for motion tracing