David Edwards

@lorros do you have the steps you went through to compile 1.8.1 on arm?

Ah, the logs time reset to zero as I unplugged the battery before connecting to USB to view the logs.

Have been to a little experiment (2 x urbans and 2 indoors) all running at readings every 2 minutes and uploading evey 3 readings. I wanted to see how the...

This moring had 1 x indoor and 1 x urban in a failed state with the red and white light on.  For the Urban it looks like once one...

Indoor & urban had the same issue again today:  For the Indoor this may be down to the battery level this time which was showing about 4% with my...

@ZodiusInfuser if there is any extra logging/tests you want me to try let me know. Both Urbans have failed today just now with the same issue on after a upload...

@daved38 I have also just got mine stable on the same patch version using a 2000mah LiPo. I have been checking the rain against a manual collector and so far...

@ZodiusInfuser Just wanted to confirm, its is nothing to do with the secure mqtt I have setup as my urban which is physically outside also failed today and this just...

@ZodiusInfuser as these four boards all need ot use secure mqtt have modfied it slightly but should captcher the results as per the logging you suggested. This is the mqtt.py...

@ZodiusInfuser Just got a failure on an urban, did work a few time before hand: ``` 2022-12-05 13:06:03 [debug / 115kB] > performing startup 2022-12-05 13:06:03 [info / 123kB] -...