icestation-32

icestation-32 copied to clipboard

Unable to build verilator sim -- "riscv-none-embed-gcc"

1

I'm currently trying to get a simulator built to run the Miyamoto-Sprint project. When I run the makefile for the simulator with the verilator switch I get the following output:...

sunnystormy

The current flash configuration on ULX3S is known to work on the blue boards with Winbond flash but not the older boards with ISSI flash. Some vendor specific commands are...

dan-rodrigues

I've dusted off some of my old FPGA projects and ran into some issues compiling `icestation-32` with the new yosys toolchain. This makes the build work again with yesterday's daily...

vmedea

Hang before reading flash and IPL

5

Hello! I'm trying this project out on an ICEbreaker v1.0e board with a WINBOND flash chip. I'm able to build and flash the bitstream and the bootloader using iceprog over...

djkunkel