ESP8266_ArtNet-LED-DMX-Node
ESP8266_ArtNet-LED-DMX-Node copied to clipboard
bombcheck
ESP8266 based WiFi ArtNet-Node for WS2812B-LED Pixel
Hi mate, I don't know if you work more on this project or if you aren't more interested on DMX, anyway I would ask you if you may port this...
Hi I get some errors when i Compile. /home/User/snap/arduino/current/Arduino/libraries/espDMX_RDM/espDMX_RDM.cpp: In member function 'void espDMX::begin(uint8_t, uint8_t*)': /home/User/snap/arduino/current/Arduino/libraries/espDMX_RDM/espDMX_RDM.cpp:389:49: error: invalid conversion from 'void*' to 'fp_putc_t {aka void (*)(char)}' [-fpermissive] ets_install_putc1((void *) &uart_ignore_char);...
Hi, Firstly, I'm quite new at this, so i am doing something dumb, Please feel free to point that out. Also I'll offer a blanket apology in advance for any...
Hi, it works, it's the only release of many (.bin files) I've tried that works, thanks :) It's also stable, there is only one problem, if a little power interrupt...
Could you please add a schematic? or is it the same as Matthew Tong? A schematic for the NodeMCU V3 would be really good.
Is the flickering issue solved? Because in my tests with jinx Simple switch between r, g, b and rgb(white) Over 60 led... Produces flickering Thank you
hello body, it's me again, my nodemcu was arrived, base on esp-12E, it works, and never crash, but one more issue is there, signal output are not smooth, only 5...
I was first follow Matthew Tong previously project and get the information from SCH file. was bought 6 ESP-07 from Taobao(alibaba). even your project which was improved, but it works...
Hello, having the problem that DMX Input works well for me if i dont have any output on Port B. But if i connect WS2812 stripes on output B and...
successfully flashed to a nodemcu. Shows up in my wifi list as "espArtLeDNode0203" but it says the password is invalid even when i use cut/paste (no quotes) "espArtLeDNode".
