Blaž Kristan

I am sure this makes sense for your configuration but generally I would recommend against exposing WLED devices to WAN. If by WAN you refer to multiple VLANs where your...

Have you tried another GPIO? Some GPIO pins output something during boot. You can also uncheck "active-high" and reverse contacts on relay.

I have about 20 devices set up with relay some with boot preset some without and I am not seeing this behaviour. Please post your cfg.json and wiring schematics and...

The race condition has been fixed in 0.13.3. There were reports of this issue re-occurring on 0.13.3 though. In such case it may not be an issue of WLED but...

Have you tried erasing flash? Use esptool when doing so.

This is a known issue and it mainly affects ESP32. It is most likely caused by dual core nature of ESP32 and the way LittleFS and AsyncWebServer libraries are written....

Why would you update presets often (and via MQTT)? What do you consider "better"?

> as mentioned above: For notifications of phone calls: Save currently effect as preset 99, play notification, restore saved preset 99 A waste. You can query which preset/effect is running...

If possible try 0.14-b0. Available from @srg74 repository or if you compile yourself. I can provide generic ESP32 binary without any extra options. **WARNING** it is *beta* software with all...

Mind you, saving preset is still done in network callback. Prone to corruption. Everything else has been rewritten.