bananapi-zero-ubuntu-base-minimal
bananapi-zero-ubuntu-base-minimal copied to clipboard
avafinger
BananaPi M2 Zero - Ubuntu Focal Base Minimal Image (Experimental) - U-Boot 2017.09 / Kernel 4.18.y / Kernel 4.19.y / Kernel 4.20.y / Kernel 5.3.y / Kernel 5.6.y / Kernel 5.7.y / Kernel 5.11.y
Hello, Not sure if xorg (2d, not 3d) can be run on this image but however when I tried to run xorg (and from that a desktop) I get the...
I'm having issues with the convenience image. HDMI is pretty much unreadable, since it is shifted left by 3-4 characters, top and bottom by several lines. Monitored on two BPI...
I've been trying to use this project since it has ethernet support, but it seems to crash horribly after about a day of use. By horribly, I mean that it...
Hi @avafinger I'd like to modify the device tree to pinmux a few things differently out the 40-pin expansion header. I'd like to mux i2c1 SCL and SDA to pins...
g_ether
According to [the forums](http://forum.banana-pi.org/t/ssh-connection-over-the-usb-otg-connection-how/2587/2), a patch is required to enable OTG gadget ethernet. The file is [here](http://igor2.repo.hu/tmp/opi_usb_gadget.txt). Is this enabled on any of the kernels?
Hi I have banana pi m2 zero board. Now I want to receive a signal through ir sensor. I have added ovelays = cir in armbianEnv file but now I...
If you change boot_size from 100 to 256, you can run do-release-upgrade later on to bring it up to 22.04. WiFi still works, Bluetooth still works, and the power buttons...
Hi @avafinger, First, I would like to thank you for your work and for sharing it here. I want to ask you if there is any way to put the...
