apollo

apollo copied to clipboard

configmap配置如下 k8s deployment挂载配置文件如下图 启动的时候active变量如下图 下面是报错内容，我已明确检查配置ldap的配置文件已经被挂载进去

The error you're encountering, related to a duplicate bean definition named 'applicationTaskExecutor', typically occurs due to conflicting bean definitions within the Spring context. This can happen when there are overlapping configurations, especially when multiple profiles are active, such as github and ldap in your case. Here's how to address the issue:

1. Check for Manual Bean Definitions: Look through your configuration files and Java config classes for any manually defined TaskExecutor beans. If an applicationTaskExecutor is defined, consider renaming it or leveraging Spring Boot's default task executor instead.

2. Examine Profile-Specific Configurations: Ensure there are no conflicting bean definitions across the profiles you're using. This includes reviewing configurations related to the github profile, which might be contributing to the issue.

3. Use Conditional Bean Definitions: Apply the @ConditionalOnMissingBean annotation to your custom bean definitions to prevent conflicts with Spring Boot's auto-configured beans.

4. Rely on Spring Boot Defaults: If your application doesn't specifically require a custom TaskExecutor, it's best to use the one auto-configured by Spring Boot to avoid such conflicts.

5. Enable Debug Logging: To get a clearer picture of why the conflict occurs, enable debug logging for Spring's bean loading and condition evaluation processes. This can help identify the root cause of the duplicate bean definition.

6. Review Apollo Configuration: Make sure that the LDAP integration or any other Apollo-specific configuration does not introduce a conflicting bean definition.

If these steps do not resolve the issue, providing more details about your configurations and any customizations to Apollo's default behavior could be helpful. Specifically, examining the Apollo authentication configurations and any related customizations might offer further insights.

Details

Sources

• Apollo service can‘t start after config LDAP，who can help me
• apollo-portal/src/main/java/com/ctrip/framework/apollo/portal/spi/configuration/AuthConfiguration.java
• apollo-portal/src/main/resources/application-ldap-apacheds-sample.yml
• apollo-configservice/src/main/resources/application.properties
• docs/en/deployment/distributed-deployment-guide.md

About Dosu This response is meant to be useful and save you time. It is not meant to be a precise solution, but rather a starting point for your own research.

Help me be more useful! Please leave a 👍 if this is helpful and 👎 if it is irrelevant.

To continue the conversation, mention @dosu.

This issue has been automatically marked as stale because it has not had activity in the last 30 days. It will be closed in 7 days unless it is tagged "help wanted" or other activity occurs. Thank you for your contributions.

可以看下具体的报错信息，截图中的信息不够明确

可以看下具体的报错信息，截图中的信息还不够明确

我遇到了同样的错误，这是细节

可以查看具体的报错信息，截图中的信息还不够明确

我遇到了同样的错误，这是

这个问题我已经解决了，根据此问题修改对应的代码，重新编译生成jar包替换即可。 https://github.com/apolloconfig/apollo/pull/5055/files

This issue has been automatically marked as stale because it has not had activity in the last 30 days. It will be closed in 7 days unless it is tagged "help wanted" or other activity occurs. Thank you for your contributions.

This issue has been automatically closed because it has not had activity in the last 7 days. If this issue is still valid, please ping a maintainer and ask them to label it as "help wanted". Thank you for your contributions.