IMPORTANT

This repository has been archived and is no longer maintained since all changes required to support Verilator in cocotb have been upstreamed.

Verilator+cocotb integration quick start guide

1. Install dependencies:

   sudo apt-get install virtualenv build-essential
   sudo apt-get install python3-dev
   sudo apt install gtkwave
   
   

2. Clone the repository:

   git clone https://github.com/antmicro/cocotb-verilator-build.git build
   

3. Change working directory to cloned repository:

   cd build
   

4. Download missing submodules:

   git submodule update --init
   

5. Build and install Verilator in local environment

   make env/bin/verilator
   

6. Install cocotb in local environment:

   make env/bin/cocotb-config
   

Examples

To run the examples included in Cocotb, simply run make cocotb/name_of_the_example/run. To clean the directory with the examples execute make cocotb/name_of_the_example/clean.

Running the adder example:

make cocotb/adder/run

Runing the D flip-flop example:

make cocotb/dff/run

Running axi_lite_slave:

make cocotb/axi_lite_slave/run

To dump a vaweform from the simulation set the VERILATOR_TRACE=1 env variable e.g:

VERILATOR_TRACE=1 make cocotb/dff/run

The vaweform file is written in the example folder. gtkwave can be used for viewing it e.g:

gtkwave cocotb/examples/dff/tests/dump.vcd

An example waveform you should get is shown below:

An example test output is shown in the picture bellow: