XTLS
相同的 config.json，在 Linux 端无效，在 Mac 端有效
如题，我在 Mac 端使用一套 vless + xtls 配置的代理服务器，使用的客户端为 V2RayU，使用的内核为 XRay 1.4.2，配置完成后可正常访问 Google 等外网。
之后将 config.json 复制到 Linux 服务器上进行配置（CentOS7），直接使用 XRay 加载该配置运行，XRay 版本为 1.5.5，通过 proxychains4 进行代理后发现打出的日志为权限无效或过期等内容，具体如下：
2022/07/19 00:44:09 [Warning] [3842434669] app/proxyman/outbound: failed to process outbound traffic > proxy/vless/outbound: failed to find an available destination > common/retry: [transport/internet/websocket: failed to dial WebSocket > transport/internet/websocket: failed to dial to (wss://xxx): > x509: certificate has expired or is not yet valid: current time 2022-07-19T00:44:05+08:00 is after 2021-09-30T14:01:15Z transport/internet/websocket: failed to dial WebSocket > transport/internet/websocket: failed to dial to (wss://xxx): > x509: certificate has expired or is not yet valid: current time 2022-07-19T00:44:06+08:00 is after 2021-09-30T14:01:15Z transport/internet/websocket: failed to dial WebSocket > transport/internet/websocket: failed to dial to (wss://xxx): > x509: certificate has expired or is not yet valid: current time 2022-07-19T00:44:07+08:00 is after 2021-09-30T14:01:15Z transport/internet/websocket: failed to dial WebSocket > transport/internet/websocket: failed to dial to (wss://xxx): > x509: certificate has expired or is not yet valid: current time 2022-07-19T00:44:08+08:00 is after 2021-09-30T14:01:15Z] > common/retry: all retry attempts failed 2022/07/19 00:44:09 [Info] [3842434669] app/proxyman/inbound: connection ends > proxy/socks: connection ends > proxy/socks: failed to transport all TCP response > io: read/write on closed pipe
其中服务器信息已做屏蔽。
不知道是否有相关经历的朋友可以分享一下经验？非常感谢！
感谢你的回复！ 目前 vps 端使用的是 v2ray 4.32.1，应该是近期的版本，为了稳定性暂时未更新到最新。 Mac 端和 Linux 端均已更新至 XRay 1.5.5，目前 Mac 端仍可正常代理，检查日志也无特殊异常。
config.json 如下：
{
"log": {
"error": "",
"loglevel": "info",
"access": ""
},
"inbounds": [
{
"listen": "127.0.0.1",
"protocol": "socks",
"settings": {
"udp": false,
"auth": "noauth"
},
"port": "1080"
},
{
"listen": "127.0.0.1",
"protocol": "http",
"settings": {
"timeout": 360
},
"port": "1087"
}
],
"outbounds": [
{
"mux": {
"enabled": false,
"concurrency": 8
},
"protocol": "vless",
"streamSettings": {
"wsSettings": {
"path": "/xxx",
"headers": {
"host": "xxx"
}
},
"tlsSettings": {
"serverName": "xxx",
"allowInsecure": false
},
"security": "tls",
"network": "ws"
},
"tag": "proxy",
"settings": {
"vnext": [
{
"address": "ip",
"users": [
{
"encryption": "none",
"id": "password",
"level": 0,
"flow": ""
}
],
"port": 443
}
]
}
},
{
"tag": "direct",
"protocol": "freedom",
"settings": {
"domainStrategy": "UseIP",
"userLevel": 0
}
},
{
"tag": "block",
"protocol": "blackhole",
"settings": {
"response": {
"type": "none"
}
}
}
],
"dns": {},
"routing": {
"settings": {
"domainStrategy": "AsIs",
"rules": [
{
"type": "field",
"outboundTag": "direct",
"domain": [
"localhost",
"geosite:cn"
]
},
{
"type": "field",
"ip": [
"geoip:private",
"geoip:cn"
],
"outboundTag": "direct"
}
]
}
},
"transport": {}
}
由于 Linux 端使用了相同的配置文件，故不重复粘贴。 其中 Linux 端为避免端口冲突，将 1080 改为了 10808，从 v2ray 端的日志也可以看到 proxy4chains 的流量被接受，应可排除端口问题。
看客户端配置你用的组合是vless ws tls。客户端配置看不出有问题。
你能不能再找个vps用xray core搭好后，配置文件用一样的，测试下能不能通（排除法因为不知道你服务器端配置内容）（排除v2fly 和xray core原因）（一般客户和服务器core我喜欢都用一样的）
另外建议帖个vps的config文件内容。或加xray的tg群白天找水友求助（方便有人实时回复你）
