ValdikSS

The plugins do not support UDP at all. If you configure UDP forwarding with the plugin enabled, plugin settings are no in effect. https://ntc.party/t/testing-shadowsocks-udp-handling-with-obfuscation-enabled/533

I'm observing something similar. Test setup: * 13th Gen Intel(R) Core(TM) i5-1340P * Linux Fedora 39, kernel 6.7.4-200.fc39.x86_64 * Two network namespaces connected via `veth` interfaces (not via `netns-test.sh` from...

TCP connection without DCO shows 1.5 Gbit/s, with DCO — 742 mbit/s.

DCO module doesn't support TCP MSS value modification (mssfix)? The packets are sent with 1460 MSS. Executing `ip route add 192.168.18.2 dev tun1 advmss 1400` from both namespaces gives slight...

Аналогичная ситуация с mozilla.cloudflare-dns.com https://ntc.party/t/esni-encrypted-sni/68/4 На одном скриншоте — partially blocked, на другом — blocked. Разница во времени — 20 минут.

Неправильный результат для telegram.org 

Проблема всё ещё не устранена, наблюдается часто, из-за чего сервисом фактически невозможно пользоваться.

> you can build the framework by yourself Sure I can, but that won't fix high battery drain for all other users.

@fortuna, this issue is about TCP-level Keep-Alive in golang, not a software-level connection timeout found in shadowsocks-libev. All current golang applications which use `dial` use 15-second TCP keep-alive, which drains...

> So I would need to publish a fake scan area, and ignore any scan area user settings. Yes, I guess the default value would be Letter or A4 for...