🌐🔍 Red Network Tool (أداة شبكة ريد)

What is RedNetwork Tool?

Red Network Tool is a tool for network exploration and info finding over the internet. There is a config feature!

Current tool version consist of:

• Ifconfig.
• Port scan(comprehensive, TCP, SYN, ACK, UDP).
• Host discovery(scan for up devices on a local network).
• DNS checks with geolocation information.
• Banner grabbing.
• Ping(send ICMP packets to a host to check connectivity).
• Traceroute(diagnose route paths and measure transit delays).
• Reverse ip lookup.
• Censys.
• Site technologies detection feature.
• Honeypot probability.
• Mac address lookup.
• Dns mapping.

Supported Devices:

This program is supported in all operating system like Linux, Windows and MacOS. The Code is written in python3, so don't worry it works well without any bugs.

Installing (Windows/Linux/MacOS):

git clone https://github.com/Red-company/RedNetwork_Tool.git
cd RN_Tool
bash setup.sh

! After executing setup.sh, you'll need to edit newly created config.py

sudo python3 RedNetwork_Tool.py

How to use? Let's figure it out:

Ifconfig

If you want to display your system's current TCP/IP network configuration, type the following command:

-ifconfig

Ports scanning

Supported types:

• SYN (-scansyn)
• TCP (-scantcp)
• UDP (-scanudp)
• ACK (-scanack)
• Comprehensive scan (-scan).

-scan -host [HOST(s)]

-scan -host [HOST(s)] -p [PORT(s)]

-scan -host [HOST(s)] -prange [START PORT] [END PORT]

-scan -iprange [START IP] [END IP] -p [PORT(s)]

-scan -iprange [START IP] [END IP] -prange [START PORT] [END PORT]

Local scan

Perform scan to detect local devices.

-scanlocal

DNS check

Similar to the well known nslookup command used on UNIX systems.

-ns [HOST(s)]

Banner grabbing

To perform banner grabbing, type one of the following commands:

-grab -host [HOST(s)] -p [PORT(s)]

-grab -iprange [START IP] [END IP] -prange [START PORT] [END PORT]

-grab -host [HOST(s)] -prange [START PORT] [END PORT]

-grab -iprange [START IP] [END IP] -p [PORT(s)]

Ping

Uses to send ICMP packets to a host to check connectivity, simply type:

-ping [HOST]

Traceroute

Uses to diagnose route paths and measure transit delays, use the following command:

-traceroute [HOST]

Reverse ip lookup

Uses to perform a reverse ip lookup, to perform write:

-reverseip [HOST]

Censys

Censys feature, just type:

-censys [HOST]

TechDetect

Uses to detect site's technologies. Type:

-techdetect [URL]

Honeypot

Uses to calculate probability of ip being honeypot. To calculate just type:

-honeypot [IP]

Mac address lookup

You can check information about certain mac address with it, type:

-macaddress [MAC]

Dns map

Do you want to get a map of dns servers of certain organization? Okay, here it is:

-dnsmap [DOMAIN]

Subdomains

Subdomains, unfortunately, only by bruteforcing 10.000 most common ones.

-subdomains mail.ru

More screenshots? Here they are:

All material in this repository is in the public domain.