Emulated_USB_Printer

Emulated_USB_Printer copied to clipboard

Unable to start emulated printing

3

Hello, I followed the instructions on a pi zero 2 w and then on a pi zero w, but I get the error message: [!] Error -1 opening /dev/g_printer [*]...

ozgith

Emulated Printer Working, Output Not So Sure

1

I have followed all of the steps within this guide and have a printer emulated and working, that is to say, it's storing data in the "printjob" directory, however, I'm...

JIGR1969

Raspberry Pi 4 - Problems with accessing /dev/g_printer0

16

On a Raspberry Pi 4B, I have used this code and have the USB-OTG port correctly configured to emulate an Epson TM-T88V printer. The host machine recognises the Raspberry Pi...

RWAP

Troubles printing data

33

Hello, First of all, thank you for your projects, it helps me a lot moving forward on my project. Now, i'm having some issus printing data from my computer to...

alassaneg

Sony Printer, ACL conversion and Windows problem

1

Hello! I'm emulating a Sony printer: up-dr80md I think i found the correct parameters: `modprobe g_printer idVendor=0x054C idProduct=0x3C3 bcdDevice=0x0108 iManufacturer="SONY" iProduct="UP-DR80MD" iSerialNumber="00000000" iPNPstring="MFG:SONY;MDL:UP-DR80MD;DES:Sony UP-DR80MD;CMD:SPJL-DS,SPDL-DS;CLS:PRINTER;SCDIV:0010;SCSYV:02011000;SCSNO:f4?-------------;SCSYS:0000003800010000000100;SCMDS:00000000000000000000;SCPRS:0000;SCSES:0000;SCWTS:0000;SCJBS:0000;SCSYE:00;SCMDE:0A08;SCMCE:00;SCJBI:0000000000000000;SCSYI:0A300E566DCC00004000E92D012D00;SCSVI:000000000000;SCMNI:000000000000;SCCAI:00000000000000;SCGAI:0000;SCGSI:00;SCMDI:1100FF;"` The OS correctly see the printer...

leouzz

Is there any way to get Emulated printer to show up in USB devices

2

Is there any way for CUPS to detect the emulated printer as a local printer?

saudiqbal