openevse_esp32_firmware icon indicating copy to clipboard operation
openevse_esp32_firmware copied to clipboard

Published 20 hours ago • verified publisher icon OpenEVSE

The delay timer does not work

Open DmitryAVR opened this issue 3 years ago • 5 comments

Hello. I built OpenEVSE without a display. And the delay timer does not work for me (in the screenshot).

image

When the timer is set, EVSE goes into standby mode. But charging does not start at the beginning of time. Is it due to the display not connected, or do I have another error?

DmitryAVR avatar Jul 04 '22 13:07 DmitryAVR

Are you using any other 'smart' features, like PV divert?

jeremypoulter avatar Jul 05 '22 15:07 jeremypoulter

No. I checked everything, the timer works! But I understand why it didn't work. I get lost time when I set it on the browser.

For example, now I have 9:20. I save. But after 1 second, the time becomes 6:20. Here are the screenshots

image

image

DmitryAVR avatar Jul 06 '22 06:07 DmitryAVR

Interesting have you previously set the time via NTP and set a time zone?

jeremypoulter avatar Jul 06 '22 06:07 jeremypoulter

Yes, I had the time zone Etc/GMT-3. And I understood why time was changing. But now another problem has arisen. When I set Etc/GMT or Etc/GMT+0 or Etc/GMT-0 or Etc/GMT-1 or Etc/GMT-2, the timer does not work. It only works at Etc/GMT-3

DmitryAVR avatar Jul 06 '22 07:07 DmitryAVR

For example. Set the timer as in the screenshot. Charging on pause. Time zone: Etc/Universal image

Next, I set the timer to start 3 hours earlier and the charging was activated. image

DmitryAVR avatar Jul 27 '22 08:07 DmitryAVR