Emulator Detection Bypass steps

Download and setup emulator with any SDK version 12 or below with playstore of x86_64 arch.

Magisk image flashing[^1]

• Download and extract rootAVD repo from this Link
• Open terminal on your pc and navigate to above extracted dir.
• trigger command as

  ./rootAVD.sh
  

• This will list you commands that you need to trigger.
• Trigger command

  ./rootAVD.sh ListAllAVDs
  

  and select the image matching your emulators matching arch type.
• Once flashing is done it should reboot your emulator.
• Trigger command

  ./rootAVD.sh InstallApps
  

• Once done your emulator will have magisk installed in it,start the application it will ask permission which will then reboot your device.
• Once device has rebooted go to magisk settings and enable zygisk setting and reboot your device from magisk options.
• You are now done flashing/rooting your deivce.

Setting up termux on device.

• Download latest apk from termux repo release section based on your emulator arch type Link
• Open the app and enter command

  pkg update
  

• Once above is done enter command

  pkg upgrade
  

• Enter command

  termux-setup-storage
  

  and grant storage permission.
• Your termux is not ready to use.

Additional Apps/tools that are needed

• Download and install root explorer apk.

Setting up frida and other packages in termux[^2]

• Enter command

  pkg install build-essential python python-pip git wget binutils openssl
  

• Download Frida Core DevKit according to device architecture from Link
• Extract the zip and move the fils in your emulator (there will be 4 files)
• Open root explorer and navigate to root->sdcard->downloads you will be able to locate your files that you had recently copied to this device.
• Move these files to root->sdcard->devkit(make a new dir).
• Open termux and enter command

export FRIDA_CORE_DEVKIT=/sdcard/devkit/

if you extracted it on some other location, use that path.make sure you run above command without root/su.

• Install frida and its commandline tools from pip

  pip install frida frida-tools
  

  Now Frida is available to use from commandline.you can check version by typeing frida-ps --version
• Optional steps if with above frida is giving error.

  pkg install root-repo
  

  pkg install frida-python
  

Frida server installation flow

• Download latest version of frida-server based on device arc type(file name containes server and android) Link

• Extract the zip and move the file in you emulator by draging and droping.

• Open root explorer and navigate to root->sdcard->download where you will be able to locate your file.

• Move the file to root->data->local->tmp.

• Rename to file to frida-server

• Long press on the file and select additional options from the top left and select permissions and enable execution rights to all user types.

  

• open termux and enter folling commands (When run su command, If App ask for the super permission allow it with press on Grant)

• Goto your app permissions->Additional permmisions->allow Run command in termux terminal(Check below screenshots)

• Now to start the server entering following commands.

  su
  

  cd /data/local/tmp
  

  ls (It will shows you a dir and files of the tmp dir)
  

  ./frida-server -l 127.0.0.1
  

  once above command is entered your cursor will move to next line and continue blinking.Leave this session of termux as it is and dont close it. To open a new session in termux swipe from the left edge to open a draw and select new session.

• Move emulator bypass js file to root->data->local->tmp

• Now to check if you are able to connect with the server from your new termux session enter below command to list all device process

  frida-ps -H 127.0.0.1
  

  or you can run acutal bypass command as

  frida -H 127.0.0.1 -f your.packagename -l /data/local/tmp/bypass.js
  

• If working that our termux setup is complete.

Termux setup to accept external commands.

• Making termux accept external commands[^3].

  value="true"; key="allow-external-apps"; file="/data/data/com.termux/files/home/.termux/termux.properties"; mkdir -p "$(dirname "$file")"; chmod 700 "$(dirname "$file")"; if ! grep -E '^'"$key"'=.*' $file &>/dev/null; then [[ -s "$file" && ! -z "$(tail -c 1 "$file")" ]] && newline=$'\n' || newline=""; echo "$newline$key=$value" >> "$file"; else sed -i'' -E 's/^'"$key"'=.*/'"$key=$value"'/' $file; fi
  

• Before your app can transmit commands to termux you will have to enable certain permission and make the user grant them.

  <uses-permission android:name="com.termux.permission.RUN_COMMAND"/>
  

  <queries>
        <package android:name="com.termux" />
        <intent>
            <action android:name="android.intent.action.MAIN" />
        </intent>
  </queries>
  

• Sending commands from your app to termux[^4].

  intent.setClassName("com.termux", "com.termux.app.RunCommandService")
  intent.action = "com.termux.RUN_COMMAND"
  intent.putExtra("com.termux.RUN_COMMAND_PATH", "/data/data/com.termux/files/usr/bin/frida")
  intent.putExtra(
            "com.termux.RUN_COMMAND_ARGUMENTS",
            arrayOf("-H", "127.0.0.1", "-f", "your app package name", "-l", "/data/local/tmp/bypass.js")
  )
  intent.putExtra("com.termux.RUN_COMMAND_BACKGROUND", true)
  intent.putExtra("com.termux.RUN_COMMAND_SESSION_ACTION", "4")
  startService(intent)
  

Additional step

• In case you encounter error while running frida command as below

  File "/data/data/com.termux/files/usr/lib/python3.11/re/_parser.py", line 455, in _parse_sub itemsappend(_parse(source, state, verbose, nested + 1
  

  you can enter following command as mentioned here Link

  silverbullet-herr commented Jan 7, 2023

  try this: pip uninstall pygments && pip install pygments to install the latest version instead of the required version that's how it worked for me

References [^1]: Rooting emulator [^2]: Frida setup on termux [^3]: termux property edit [^4]: Frida run commands