zigbee2mqtt Error ZCL command

What happened?

After update Bosch Thermostat II in livingroom stopped working, losing connection and needs to be paired again. Loses again after a while the connection.

Konfig: port: /dev/ttyACM0 adapter: ember baudrate: 115200

Mosquitto broker Current version: 6.4.1

What did you expect to happen?

i expect that updates which have major issues are getting fixed ASAP

How to reproduce it (minimal and precise)

Install ncp-uart-hw-v7.4.4.0-zbdonglee-115200.gbl - and Zigbee2MQTT Current version: 1.40.1-1 - and Mosquitto broker (MQTT) Current version: 6.4.1 Pair Bosch Thermostat II via Installation Code in Zigbee2MQTT Addon

Zigbee2MQTT version

1.40.1-1

Adapter firmware version

ncp-uart-hw-v7.4.4.0-zbdonglee-115200.gbl

Adapter

Sonoff ZigBee 3,0 USB Dongle Plus-E with ember

Setup

Add-on in HomeAssistant OS on a Acer Aspire V5-573G - connected via 1m USB Cable

Debug log

[2024-09-20 20:03:43] error: 	zh:ember: Delivery of BROADCAST failed for '65535' [apsFrame={"profileId":260,"clusterId":10,"sourceEndpoint":1,"destinationEndpoint":1,"options":0,"groupId":0,"sequence":69} messageTag=255]
[2024-09-20 20:04:53] error: 	zh:ember: Delivery of BROADCAST failed for '65535' [apsFrame={"profileId":260,"clusterId":10,"sourceEndpoint":1,"destinationEndpoint":1,"options":0,"groupId":0,"sequence":76} messageTag=255]
[2024-09-20 20:11:43] error: 	zh:ember: Delivery of BROADCAST failed for '65535' [apsFrame={"profileId":260,"clusterId":10,"sourceEndpoint":1,"destinationEndpoint":1,"options":0,"groupId":0,"sequence":117} messageTag=255]
[2024-09-20 20:21:13] error: 	zh:ember: Delivery of BROADCAST failed for '65535' [apsFrame={"profileId":260,"clusterId":10,"sourceEndpoint":1,"destinationEndpoint":1,"options":0,"groupId":0,"sequence":175} messageTag=255]
[2024-09-20 20:27:24] error: 	zh:ember: Delivery of BROADCAST failed for '65535' [apsFrame={"profileId":260,"clusterId":10,"sourceEndpoint":1,"destinationEndpoint":1,"options":0,"groupId":0,"sequence":212} messageTag=255]
[2024-09-20 20:35:40] error: 	z2m: Publish 'set' 'occupied_heating_setpoint' to 'Wohnzimmer Heizung' failed: 'Error: ZCL command 0x18fc26000008245d/1 hvacThermostat.write({"occupiedHeatingSetpoint":2400}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Delivery failed for {"profileId":260,"clusterId":513,"sourceEndpoint":1,"destinationEndpoint":1,"options":4416,"groupId":0,"sequence":172})'
[2024-09-20 20:35:40] error: 	z2m: Publish 'set' 'occupied_heating_setpoint' to 'Wohnzimmer Heizung' failed: 'Error: ZCL command 0x18fc26000008245d/1 hvacThermostat.write({"occupiedHeatingSetpoint":2500}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Delivery failed for {"profileId":260,"clusterId":513,"sourceEndpoint":1,"destinationEndpoint":1,"options":4416,"groupId":0,"sequence":174})'
[2024-09-20 20:35:59] error: 	z2m: Publish 'set' 'occupied_heating_setpoint' to 'Wohnzimmer Heizung' failed: 'Error: ZCL command 0x18fc26000008245d/1 hvacThermostat.write({"occupiedHeatingSetpoint":2350}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Delivery failed for {"profileId":260,"clusterId":513,"sourceEndpoint":1,"destinationEndpoint":1,"options":4416,"groupId":0,"sequence":183})'

Sep 20 '24 19:09 JericoPablo

also i always need to delete that entity and readd it again - pressing configure or interview button does not help - ends in error

Sep 20 '24 19:09 JericoPablo

Similar issue is occurring with Hive receiver and thermostat:

 z2m: Publish 'set' 'occupied_heating_setpoint' to '0x001e5e09027d7641' failed: 'Error: ZCL command 0x001e5e09027d7641/6 hvacThermostat.write({"occupiedHeatingSetpoint":2400}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Status 'INVALID_VALUE')'

Tried to reset and re-pair both devices, receiver is pairing but still getting above error and thermostat is failing to re-pair to receiver with:

zh:controller: Interview failed for '0x001e5e09027bc61f with error 'Error: Interview failed because can not get active endpoints ('0x001e5e09027bc61f')'

Also using Sonoff Zigbee Dongle E, issue showed up two days ago but I'm not aware of having updated anything recently (z2m, dongle firmware, hive firmware, home assistant etc)

Sep 22 '24 22:09 b177y

now i cannot connect my Bosch Thermostat II again. Its insane...

Sep 30 '24 12:09 JericoPablo

same here, anything I can do to help nail this down?

Oct 02 '24 21:10 reinhardsiegel79

Similar problem z2m: Publish 'set' 'remote_temperature' to 'termostat sypialnia' failed: 'Error: ZCL command 0x18fc2600000914b8/1 hvac Thermostat.write({"remote Temperatur e":2349}, {"timeout":10000,"disableResponse":false,"di sableRecovery":false,"disableDefaultRespon se":true,"direction":0,"reservedBits":0,"manuf acturerCode":4617,"writeUndiv":false}) failed (Timeout - 42515-1-95-513-4 after 10000ms)'

Oct 03 '24 19:10 allbercik

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days

Dec 11 '24 00:12 github-actions[bot]

i rolled back to 1.38.0-1 since then its working, but there is already 1.42.0-2 out. Did anyone here with same problems tried it out yet?

Dec 12 '24 22:12 JericoPablo

same problem here…

Dec 23 '24 19:12 tommyguuuun

i rolled back to 1.38.0-1 since then its working, but there is already 1.42.0-2 out. Did anyone here with same problems tried it out yet?

How did you roll back? I have the dame problems with all my aqara radiators and it doesn‘t seem there will be a fix for this soon…

Dec 31 '24 09:12 tommyguuuun

i rolled back to 1.38.0-1 since then its working, but there is already 1.42.0-2 out. Did anyone here with same problems tried it out yet?

How did you roll back? I have the dame problems with all my aqara radiators and it doesn‘t seem there will be a fix for this soon…

sorry didnt see ur msg, Settings, Backups, then choose the backup before u updated.

Jan 21 '25 19:01 JericoPablo

2.1.1 this is still a problem

error 2025-02-21 11:24:05z2m: Publish 'set' 'occupied_heating_setpoint' to 'Bedroom Radiator' failed: 'Error: ZCL command 0x44e2f8fffe1a5ba7/1 hvacThermostat.write({"occupiedHeatingSetpoint":2000}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (ZCL command 0x44e2f8fffe1a5ba7/1 hvacThermostat.write({"occupiedHeatingSetpoint":2000}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Delivery failed for '9312'.))'

Feb 21 '25 11:02 wtkchampion

I get the exect same error:

error 2025-03-04 13:50:49z2m: Publish 'set' 'occupied_heating_setpoint' to 'Schlafzimmer Heizung' failed: 'Error: ZCL command 0x74057c000000c772/1 hvacThermostat.write({"occupiedHeatingSetpoint":600}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (ZCL command 0x74057c000000c772/1 hvacThermostat.write({"occupiedHeatingSetpoint":600}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Delivery failed for '47369'.))'

Zigbee2MQTT version :2.1.3 Coordinator type: EmberZNet Coordinator revision: 7.4.4 [GA]

Mar 04 '25 12:03 Dangersohn

Similar issue, but with Z2M v2.2.1, firmware ember 7.4.4 and Sonoff Zigbee dongle plus v2.

Apr 25 '25 13:04 ondrejmo

This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days

Jun 25 '25 00:06 github-actions[bot]