96Boards-Camera icon indicating copy to clipboard operation
96Boards-Camera copied to clipboard

Published 20 hours ago • verified publisher icon Kevin-WSCU

Board v2 physical errors

Open lbdroid opened this issue 8 years ago • 3 comments
trafficstars

  1. The connection headers selected for the HS and LS connectors are different heights. This causes the camera mezzanine board to sit at a slant relative to the 96boards base SBC. You should either select a taller LS header, or a shorter HS connector. Both options are available.
  2. The mounting hole pattern does not comply with 96boards specification. Two of the holes DO NOT line up with the 96boards base SBC.

You can find the specifications here; http://www.96boards.org/ce-specification

You can see their list of recommended connectors on page 12, and location for the drill holes on page 24.

lbdroid avatar May 29 '17 14:05 lbdroid

Thanks lbdroid,we will update these items in the next update,V2.1

Kevin-WSCU avatar Jul 21 '17 06:07 Kevin-WSCU

The connection headers selected for the HS and LS connectors are different heights. This causes the camera mezzanine board to sit at a slant relative to the 96boards base SBC. You should either select a taller LS header, or a shorter HS connector. Both options are available.

This wasn't fixed in v2.1 unfortunately.

tjrin avatar Jun 13 '19 21:06 tjrin

The height issue is because they're using the wrong part for the HS connector. The layout doesn't need to be changed, just the parts they're ordering.

lbdroid avatar Jun 14 '19 15:06 lbdroid