JvanKatwijk

I got a similar anwer, depending on the interface to the chip it may be worthwhile to create an interface Op vr 17 dec. 2021 om 11:24 schreef happyfewNL ***@***.***>:...

I do not know the RX-888, what is the rate? Op za 27 nov. 2021 om 17:12 schreef jjcarron ***@***.***>: > Trying to start the application with ExtIO_sddc.dll for RX-888...

Sampling frequency seems a little too high, if I read it correctly, it is 64000000, while DAB needs something in the range of 2 MHz (2.048 MHz to be precise,...

Interesting device, do you have a description of the library functions? 50Mhz would (almost) cover the whole DAB band (175 .. 240 MHz), so in order for the data to...

Well, first of all I try to understand what the features/capabilities of the device are. Most devices I have seen so far have options to set the samplerate to a...

a. if you look at the processor load (e.g. by looking at htop), is the processor load divided (more or less( equally over the cores or is there a single...

OK, I'll have a look at the record function later today. Op di 17 nov. 2020 om 08:44 schreef Weppel : > Processor load isn't equally divided over cores, but...

I just made a 10 minute recording on an RPI 3, and when playing the recording with aplay on the RPI there was no jitter/skipping at all. (I recorded with...

what AAC decoder did you include in the configuration ? fdkaac or faad I seem to recall that when using fdkaac there were some glitches in the audio output Op...

for some devices there is a device selection mechanism, invoked as soon as the system detects that there are more device candidates Can you be slightly more specific and give...