ccg-bitc
ccg-bitc copied to clipboard
Published
20 hours ago •
GuildTV
GuildTV
CasparCG BITC Overlay
Introduction
This is a simple timecode overlay for when using CasparCG as a simple VT player. The overlay is run on a second channel over a routed copy of the original clip and can be played out through a second decklink or screen consumer.
It reads some basic clip data over OSC (name, fps, time) and is compatible with CasparCG 2.0 and 2.1
Configuration
CasparCG
CasparCG needs to have at least 2 channels (one for playback, one for the overlayed output) and be set to output OSC to the local machine
<osc>
<predefined-clients>
<predefined-client>
<address>127.0.0.1</address>
<port>5253</port>
</predefined-client>
</predefined-clients>
</osc>
BITC
Various configuration options are available. These should be specified when starting the program.
| Option | Default | Description |
|---|---|---|
| --http.port | 8081 | Port to serve the html overlay on |
| --osc.port | 5253 | Port to listen to OSC on |
| --caspar.host | 127.0.0.1 | IP address of caspar host |
| --caspar.port | 5250 | Port of caspar host |
| --source.channel | 1 | Channel of clip to monitor |
| --source.layer | 10 | Layer of clip to monitor |
| --output.channel | 2 | Channel to use for output with overlay |
GuildTV