1541ultimate
1541ultimate copied to clipboard
GideonZ
Official GIT archive of 1541 ultimate II sources
When attempting to update my UltimateII from 3.1 -> 3.7 or from 3.6 -> 3.7, it freezes my C128. I opened an issue about this over on the releases repo...
Using the official KoalaPainter cartridge, it will not boot to the cartridge if the pad is plugged in (either port, although the pad should only be used in port 1)....
I pulled my original SID and inserted it in my U64E (prototype). It's detected in the Ultimate's config menu as 6581 and siddetector.prg (https://csdb.dk/release/?id=176909) also detects it as such. (UltiSid...
I have two 1541-II on from 1988 with belt drive and one from 1990 with direct drive motor. The new one with direct drive is making random reading errors "-"...
Actual key behaviour: F2 Setup menu ------------- **CRSR left**: exits Setup root menu after releasing both CRSR *and* SHIFT key. (of course this is not possible in the Setup sub...
I have a 3 key USB keyboard which is hosted on a Raspberry Pi Zero, this enables you to map any key to the 3 keys. I have these mapped...
For C128, I am using a CP/M "U2 virtual disk" driver and I would like to be able to load a file-section via the DMA-method via the cmd-interface. Would it...
IDE64 inserted, and an external cartridge selected just black screen. I have FPGA-SID connected to socket 1, and my board is one of the first ones if that does any...
It concerns all three d64 disks images from this release: https://csdb.dk/release/?id=195841 Disk one:  Disk two:  Disk three:  When scrolling through the directory files, it can even look...
I have REU enabled in the menu, 16Mb, Preload enabled, Preload path /usb0/memory.reu Using the file manager and F5 I can save the REU content. REU content can be reloaded...
