DSchndr

Install ds4drv (run it in hidraw mode if you want to use usb)

Could be because of the stealth mode because some games which want online connectivity crash the fw without sysdvr I don't want a consoleban so i kinda want to keep...

Onenote also doesn't work, the app just segfaults when it is in the "renderthread". Apparently it has worked at some point (#466)

For some users it seems like enabling poe with uci enables poe properly, the config for the gpio is there and the led turns on (with poe detection voltage in...

If 100 are 100% duty cycle i guess the driver (KP18055ESPA) just does current limiting since it is not dimming I guess 1khz is too fast for some part in...

That driver ic is wierd, setting the pwm frequency to 650Hz causes the leds to light up at 20 and have the same behavior ("nightlight" to eye melting torch) at...

@pretoriano80 Which driver chip does your lamp use, the same?

@pretoriano80 Yes, same ic I have a build with different pwm freq, only issue is what i've stated above - its kinda dim and not even near its full power...

Best would be to measure with an oscilloscope what the tuya fw does, but beware, the power supply is not isolated! I kinda dont want to take apart this lamp...

@pretoriano80 Could you test this firmware on the bulb? (Just do ota upload) Should fix the issue :) Thanks for nudging me into looking closer at the pwm code xD...