Cellie

Hi @BaltasarParreira. The sliders on the channel page set the percentage at full moon. So if you set it to 0.99% for a channel then at full moon that channel...

There is no kicking in. The moonlight is implemented as do-not-dim-below-current-moonlight.

I'm sorry. No idea. But most leds need at least something like 1-2V to function. About other lighting systems I don't know.

@LZsolt75 I think you could hack the sliders on the channels web page. See https://github.com/CelliesProjects/aquacontrol32/blob/master/webif/channels.htm#L126-L132 `0%` would become `0%` for all 5 pickers. -Or the ones you want to use...

Hmm the ili9341 is a real pita to get going. The build quality is very poor and there are a lot of differences between the different boards from suppliers like...

See also https://forum.arduino.cc/t/ili9341-white-screen-sleep-mode-caused-by-unstable-power/322737

Hi lidense. > how can I instead feed by data buffer to the stream and get it played from vs1053? Not that easy I think. This library is intended purely...

If that is all your app is doing then you could maybe use just the [VS1053 library](https://github.com/baldram/ESP_VS1053_Library) and use the VS1053 [`playChunk()`](https://github.com/baldram/ESP_VS1053_Library/blob/master/src/VS1053.h#L136-L137) function. It says that the function blocks, but...

Not at the moment.

I noticed. HLS playback is on the radar.