black image with GTX 1660

text to image every time result a black image. i've tried --medvram also --lowvram

nothing work

can someone help me plz ?

Did you try what the troubleshooting page says for that issue?

https://github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/Troubleshooting#green-or-black-screen

Hi i've founded that the issue came from chrome : it works fine on firefox !

Le dim. 25 sept. 2022 à 04:30, DvST8 @.***> a écrit :

Did you try what the troubleshooting page says for that issue?

https://github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/Troubleshooting#green-or-black-screen

— Reply to this email directly, view it on GitHub https://github.com/AUTOMATIC1111/stable-diffusion-webui/issues/1007#issuecomment-1257104267, or unsubscribe https://github.com/notifications/unsubscribe-auth/A24OE4VNHVRRGPXMAUACKKLV762L5ANCNFSM6AAAAAAQU4EZRU . You are receiving this because you authored the thread.Message ID: @.***>

--

Stéphane TEISSÈDRE

Co-Fondateur

YUME ORIGINS

@.***

05-55-39-24-11 <0555392411>

06-74-81-39-77 <0674813977>

6 Place de L'église 87 470 Peyrat l Château

yume-origins.com https://www.yume-origins.com/

https://www.facebook.com/YumeOrigins

https://twitter.com/YumeOrigins

https://www.linkedin.com/in/st%C3%A9phane-teissedre-3404b7129/

https://www.instagram.com/yumeorigins/?hl=fr

https://www.youtube.com/channel/UCUo7PakLnvtjRSyqXHR2RJg

https://signaturehound.com/signature/cta/16um2ioksqnogpu

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.

@YUMEORIGINS did you try adding the command line arguments --precision full --no-half as noted in the troubleshooting page mentioned above? It should work fine on Chrome.

Yes i've tried and it don't worked so i went on firefox and suddenly it worked. But still not working on chrome

Le dim. 25 sept. 2022 à 22:42, Jonseed @.***> a écrit :

@YUMEORIGINS https://github.com/YUMEORIGINS did you try adding the command line arguments --precision full --no-half as noted in the troubleshooting page mentioned above? It should work fine on Chrome.

— Reply to this email directly, view it on GitHub https://github.com/AUTOMATIC1111/stable-diffusion-webui/issues/1007#issuecomment-1257275821, or unsubscribe https://github.com/notifications/unsubscribe-auth/A24OE4WOBKSZDBPPO3MWM3TWAC2M7ANCNFSM6AAAAAAQU4EZRU . You are receiving this because you were mentioned.Message ID: @.***>

--

Stéphane TEISSÈDRE

Co-Fondateur

YUME ORIGINS

@.***

05-55-39-24-11 <0555392411>

06-74-81-39-77 <0674813977>

6 Place de L'église 87 470 Peyrat l Château

yume-origins.com https://www.yume-origins.com/

https://www.facebook.com/YumeOrigins

https://twitter.com/YumeOrigins

https://www.linkedin.com/in/st%C3%A9phane-teissedre-3404b7129/

https://www.instagram.com/yumeorigins/?hl=fr

https://www.youtube.com/channel/UCUo7PakLnvtjRSyqXHR2RJg

https://signaturehound.com/signature/cta/16um2ioksqnogpu

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.

I have tried the troubleshooting and I'm still experiencing this issue

This method may cure the problem.

１、Open webui-user.bat with text editor ２、write [ set COMMANDLINE_ARGS=--precision full --no-half] ３、Save webui-user.bat ４、Run webui-user.bat

⚠Attention: Different「webui.bat」と「webui-user.bat」

Now it works. I don't know why it didn't yesterday with the same manipulation but today finally it works fine thank !!

Le lun. 26 sept. 2022 à 06:43, signyamo @.***> a écrit :

This method may cure the problem.

１、Open webui-user.bat with text editor ２、write [ set COMMANDLINE_ARGS=--precision full --no-half --medvram ] ３、Save webui-user.bat ４、Run webui-user.bat

— Reply to this email directly, view it on GitHub https://github.com/AUTOMATIC1111/stable-diffusion-webui/issues/1007#issuecomment-1257474133, or unsubscribe https://github.com/notifications/unsubscribe-auth/A24OE4WEG3E4GX23CTM2D3DWAESWPANCNFSM6AAAAAAQU4EZRU . You are receiving this because you were mentioned.Message ID: @.***>

--

Stéphane TEISSÈDRE

Co-Fondateur

YUME ORIGINS

@.***

05-55-39-24-11 <0555392411>

06-74-81-39-77 <0674813977>

6 Place de L'église 87 470 Peyrat l Château

yume-origins.com https://www.yume-origins.com/

https://www.facebook.com/YumeOrigins

https://twitter.com/YumeOrigins

https://www.linkedin.com/in/st%C3%A9phane-teissedre-3404b7129/

https://www.instagram.com/yumeorigins/?hl=fr

https://www.youtube.com/channel/UCUo7PakLnvtjRSyqXHR2RJg

https://signaturehound.com/signature/cta/16um2ioksqnogpu

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.

running webui-user.bat instead of webui.bat fixed the issue for me. Thank you!

The only modification I did to the original files was to change " set COMMANDLINE_ARGS= " to " set COMMANDLINE_ARGS=--lowvram --precision full --no-half " in the webui-user.bat file. Works perfectly on Chrome. Edit: I use a 1650s with 4gb vram.

The only modification I did to the original files was to change " set COMMANDLINE_ARGS= " to " set COMMANDLINE_ARGS=--lowvram --precision full --no-half " in the webui-user.bat file. Works perfectly on Chrome. Edit: I use a 1650s with 4gb vram.

This is what finally worked for me! Thank you. 👆

very easy took me too long to finally solve use this arge " set COMMANDLINE_ARGS=--lowvram --precision full --no-half " and use firefox no more black output

This method may cure the problem.

１、Open webui-user.bat with text editor ２、write [ set COMMANDLINE_ARGS=--precision full --no-half] ３、Save webui-user.bat ４、Run webui-user.bat

⚠Attention: Different「webui.bat」と「webui-user.bat」

LOVE UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU

Now it works. I don't know why it didn't yesterday with the same manipulation but today finally it works fine thank !!

@YUMEORIGINS if it works as expected then please close the issue. This allows people explicitly searching for a "solution" to better find it and enables devs and maintainers to get a better overview over what actually needs work.