Illia Barkov

@BastiJoe Unfortunately, it is not possible, from the gateway side, because the gateway doesn't know it's name on the platform. I thought it may be done in rule chain, but...

Hi @BastiJoe, I closes this issue, because we have discussed all points during our meeting and we are going to add ability to use device identifiers in the release 3.7.7,...

Hi, The new version is released. Please try to use it, feel free to open new issue if you discover something.

Hi @Nagarro-abhishek98, Thank you for your interest in ThingsBoard IoT Gateway, unfortunately, there is no storage storage like you described, but it is a good idea, I think we will...

Hi @andersenthomas98, Thank you for your interest in ThingsBoard IoT Gateway, You are right, we have some changes in configuration, documentation is in progress. But you can ask here about...

deviceNodePattern, is the similar like it is defined in the current documentation, gateway uses it to find the base node for device, all path patterns for device can be relative...

We added separated parameters for scanning period and polling period, earlier we did the both things at the same time, but if you know that your node hierarchy won’t change...

Hi @Jonnik84, At the moment, the gateway cannot act like this, but you can use rule chains to guide the telemetry for one device to another or to the both...

Particularly you are right. When data arrives to ThingsBoard, you have a post telemetry message in rule chains, with originator - device, configured in the connector configuration. I have created...

Hi @zlwjzf, Thank you for your interest in ThingsBoard IoT Gateway, could you provide your configuration? tb_gateway.json and mqtt connector configuration files. You can replace credentials and hosts. Also, logs...