ilgrank
ilgrank
thanks for your comment @landrysik! I had already in mind to use a pair of lithium AAAs, as it seems to be the only chemistry that handles well temperatures below...
@guillermohor : a CR2032 with 4.2 voltage? Are you sure? a LIR2032 should also be 3.6V, not 4.2..
@maxoss @guillermohor : thanks both for your report. According to what pvvx experienced, now your sensors could be consuming more than expected tho.
> @landrysik Thanks for the link. I tested my 7533 clone with a 56 Ohm load connected to the output. Voltage dropped from 3,32V to 3,2V at ~85% efficiency. Voltage...
@landrysik : I know how a voltage regulator works, but thanks anyway :) I totally agree with you on the general term, in fact I opened this topic just about...
Thanks for the data @pvvx ! Btw, may I ask you what instrument are you using for the measures?
Wow, thanks @pvvx , I did not know about your power profiler!
Hello @TimvanSteenbergen Thanks for your RPI3 branch.. do you plan to update it in the future? Do you know if it works on an RPI4? Thanks!
> here is his paypal > > https://www.paypal.com/paypalme/ThomasNordquist > > i think @bj00rn doest has paypal or contribution method Thanks @Corona-Groep-NL : as I said, I already sent a donation...
@bj00rn : any chance you can add Paypal or similar to the donation methods? :)