gcvideo
gcvideo copied to clipboard
ikorb
Newer model Pluto board not working on TV
Hello,
I don’t know if this issue has been mentioned before or not.
The new KNJN Pluto boards with integrated 100Ohm resistor fails to show image on my regular TV but does work on my Gaming Monitor. Whereas the older Pluto board worked on both displays without issue it now does not.
I’ve checked all my wiring and everything seems in order. When on the monitor the image is Crisp as well so I’m ruling out interference.
TV I’m using is a 2016 Model Samsung 49UJ6xxxEU something. TV gives me a warning: “no or weak signal detected, please check source/cable.”
Any ideas as to what might cause the issue?
Sorry, no immediate idea springs to mind. It could still be intereference between the signals on the Gamecube-to-Pluto side, some displays are more tolerant to off-spec signals than others.
Hello, so on the newer board they are selling, we don't need to add a resistor?
Hello, so on the newer board they are selling, we don't need to add a resistor?
That is correct
No need to add a resistor... but a solder jumper is needed https://www.knjn.com/docs/Pluto-IIx%20HDMI%20rev.%20E.pdf
No need to add a resistor... but a solder jumper is needed https://www.knjn.com/docs/Pluto-IIx%20HDMI%20rev.%20E.pdf
Thank you!