gcvideo icon indicating copy to clipboard operation
gcvideo copied to clipboard

Published 20 hours ago • verified publisher icon ikorb

Flashing Red Screen

Open br0seph420 opened this issue 6 years ago • 2 comments

Pre-Programmed board from KNJN, double-triple checked all solder points, clock signal away from all other wires. (Tried 3 spots including going above the board) Removed and reinstalled entirely, no difference.

Screen will change resolution/flash red until eventually cutting out entirely.

br0seph420 avatar Sep 29 '18 12:09 br0seph420

Are all of your solder pads 100% o.k.? I damaged one solder pad and got no signal. Than I added a wire instead and now it is working.

elsheepy avatar Jul 25 '19 16:07 elsheepy

Do you have a layout for the pads? I am searching for the points to connect, if one is broken.

TrueCrashB avatar May 22 '23 14:05 TrueCrashB