IFo Hancroft
IFo Hancroft
Apparently I have fixed this on my local copy. I need to see how and send a PR with the fix.
Fixed by #19.
I noticed yesterday that I didn't initially add the new UI field to the table in the README, so I updated the PR to include that change as well. P.S....
#250 It's not the full Kobra family, but it's all I have, provided by Anycubic on the microSD of my Kobra 2 for the Kobra family for PrusaSlicer. Altered of...
> I am afraid this is not enough to add that printer. There is only one basic printer/filament/print profile called "Kobra2-PLA Parameter" Unfortunately, that is all that Anycubic provides for...
> More print profiles (for example different layer heights). At least some basic filament profiles (PLA/PETG). Those profiles should be tested/tuned on actual printer. Basically what would you expect as...
> Hi. If you find something interesting in my fork, I'll be pleased. https://github.com/eleksir/fbpanel/commits/mainline I have no particular interest in this project and have no plans to develop it or...
@eleksir Thank you! I'd look into your contributions. I'll ping you about sending them as a PR to https://github.com/fbpanel/fbpanel at one point if that's ok. @mk-pmb Looking at it (the...
This is on Manjaro, 64bit. The software compiled successfully as per the instructions in the README.
@usedbytes Thank you! I will check it later today. If I don't get back to you in 24 hours, then I forgot, so feel free to tag me to remind...