Iceman

With 1-2cm distance you shouldn't get the "cant select card" message any more when running. @przytular you have a `hf 14a info` output from your card?

so lets eliminate things. compile and flash device for without btaddon. run autopwn (use usb cable)

it says you are running parrot os. on which metal are you running?

and how much RAM do you have on your host OS?

so you have enough RAM, you are not on M1/ or a ARM based cpu, you use 1-2cm of distance between tag and antenna, I dunno, I ran out of...

This is where I see an issue. Somehow the hardnested command can't collect any new nonces. You only get one...  Can you try running it with the `slow` flag?

if you pull latest, I pushed a minor fix for the slow param in autopwn command. `hf mf autopwn --slow --1k -f mfc_default_keys` and do you have a picture of...

So I am curious of the output from running these following commands. I wanna see if the nonce changes, so run it all and copy pasta the output here. ```...

so you get a different nonce each time... nothing makes sense, your device is flashed with same firmware as your pm3 client. (from same build) you don't run on a...

I see that you still haven't run the init script on your device, but that shouldn't matter, ``` mem info mem spiffs info mem spiffs tree ```