Ivan Suslov

@vincegre thats why you don't use R-GN https://github.com/jdesbonnet/RCWL-0516/issues/11#issuecomment-392249631 @mattdougan @bachoo786 see explanation here https://github.com/jdesbonnet/RCWL-0516/issues/11#issuecomment-452764010

@dibs https://www.youtube.com/watch?v=YLMlRhxgTWQ watch this video from 4min. It is on russian language but briefly this is what happens: Guy said that he tried to adjust range with R-GN and failed...

@dibs it is not necessary to understand what he is saying. Just look what he points to. I briefly explained the context. Basically this is the main point, replacing "antenna...

@bachoo786 I don't know man. Take a variable resistor, solder it instead of antenna resistor and find the right for you. I did not experiment on that yet.

@bachoo786 no, see my https://github.com/jdesbonnet/RCWL-0516/issues/11#issuecomment-392249631 why you should not use R-GN spot. You should solder it instead of antenna resistor like on the picture here https://github.com/jdesbonnet/RCWL-0516/issues/11#issuecomment-392770103 and empirically find the...

@bachoo786 yes. And than experiment by adjusting resistance. If you don't want to use variable resistor (`trimmer resistor`) you can try 80 Ohm resistor, it seems to change the range...

@bachoo786 It is ok to solder it like this. It is easier to solder pins which are next to each other. Since only two pins are soldered it is still...

@bachoo786 Hi, actually I also tried this way and got similar results. It detects only fast motion and I don't like that. I would go with combination of soldered variable...

> @ericcarmi Maybe we need to update the record. With the bin recorder, versions can be problematic. Testing with wgpu isn't trivial since not all platform support WebGPU. Isn't a...

@xenova can confirm: - no opened tabs - no browser extensions One empty tab opened: Navigated to https://huggingface.co/spaces/Xenova/experimental-phi3-webgpu and loaded the model: ___ >This makes sense since it's (most likely)...