New Device: Inkbird ITC-308

[feckdej]

Describe your device It's a thermostat which supports heating and cooling. Brand: Inkbird Model: ITC-308

Partial Support? The device works partially as "Simple Heater". However, when the actual thermostat is idle or cooling, it always shows as Heating in Homekit.

Device Schema

Additional context In Homebridge when something changes, here's the line:

[Tuya] SimpleHeater changed: {"12":0,"101":"C","102":0,"104":381,"106":381,"108":0,"109":400,"110":250,"111":false,"112":false,"113":false,"115":"2","116":1010,"117":5,"118":30}

Here's what I was able to find out: 12 = not exactly sure but changes when an alarm is triggered 101 = the temperature unit 102 = the temperature calibration (in case the thermometer is of) 104 = current temperature (dp active current temperature) 106 = desired temperature (dp desired temperature) 108 = refrigeration delay 109 = High temperature Value (triggers an alarm) 110 = Low temperature Value (triggers an alarm) 111 = High temperature alarm state 112 = Low temperature alarm state 113 = ? 115 = dp active (1 = cooling ; 2 = off ; 3 = heating) 116 = not sure 117 = heating hysteresis temperature 118 = cooling back temperature