VSpd Telemetry value not refreshing in 7.1 Rc1

[jureopacak]

Current Behavior

VSpd telemetry value (which I use for Variometer) is not working in 7.1 Rc1.

Under INAV sensors I see Baro data and that seems to work perfectly fine but looks like it is not pushed as telemetry data. See attached Image.

Steps to Reproduce

1. Have Inav 7.1 RC1
2. Have ELRS (I use Radiomaster RP1 with Ranger Micro), EdgeTX "Providence" v2.9.4
3. Check Telemetry values. In my case VSpd is not refreshed.

Expected behavior

VSpd telemetry value should always be there if Baro sensor is working.

Additional context

• I noticed that value in the last flight was not 0.0/NA but stuck to some value like -0.4 if I remember correctly. If needed I can check telemetry logs from my remote.
• After this behavior is noticed I reverted to INAV 7.0 and VSpd was working as expected. I used same Diff file as for 7.1 Rc1 (without auto landing settings).

---

• FC Board name and vendor: SpeedyBee F405 Wing
• INAV version string: INAV/SPEEDYBEEF405WING 7.1.0 Feb 14 2024 / 15:58:19 (49325426)