Target Question: AtomRC F405 NAVI Mini

[HazzaHFPV]

Concerning the AtomRC F405 NAVI Target.

AtomRC have got two FCs: The F405 NAVI and the F405 NAVI Mini. They both use the same target, however the MINI does not have an SD-Card slot, but an onboard flash of 16MB. As the target is configured for the SD-Card slot, Blackbox cannot be used on the F405 NAVI Mini. I suspect a new target needs to be added for the mini?

I also see there is a new target "AtomRC F405 NAVI delux" but I cant find that board anywhere on the net?

[DzikuVx]

Have you tried to contact AtomRC customer support?

[HazzaHFPV]

I have written them a message, but I think we are moving into the time of chinese new year and therefore I don't expect an answer soon.

What I also found was that when I select "Serial" as blackbox, then "save and reboot", as soon as I try to go back to the Blackbox-Tab INAV becomes inresponsive and the FC has to be rebooted by removing power and USB to access it again.

I was hoping to just use an external logger that I have laying around and wanted to solder that to UART3, but as it is now this FC does not support any logging at all :/

I am a n00b, but I am currently watching your video from 3 years ago about custom INAV Targets. Maybe I can work something out that way :)

[HazzaHFPV]

After trying for a long time, I seem to have managed to compile a custom target for the AtomRC F405 NAVI MINI, with working Blackbox. I will attach the hex-file here. If you choose to use it, please test with caution, as I cannot guarantee that there aren't any bugs or other things that might not work, even if it seems fine on my unit. INAV_7.0.0_ATOMRCF405NAVI_MINI.zip

Edit: and up to this day, I have not received an answer from AtomRC addressing my issue. If you are in the market for a small INAV Wing Flight Controller, the new Speedybee Wing Mini would be the way to go.

[mmosca]

You may want to share what modifications you had to do, in case others are looking for it in the future.