inav icon indicating copy to clipboard operation
inav copied to clipboard
verified publisher icon iNavFlight

Iflight F7 TWING uart and motor output conflict

Open JustNoLimit opened this issue 2 years ago • 1 comments

Current Behavior

https://github.com/iNavFlight/inav/assets/33693869/44a93b64-b004-4bda-b9bb-32caa9a81b6d

Steps to Reproduce

  1. If any device is connected to uart 4
  2. If any device is connected to uart 5

Expected behavior

GPS doesn’t work on Uart4 or Uart5. Conflicts with M1 servo output. GPS works on Uart2. RX works on Uart1. Servo outputs working on M1 - M4. I know that uart 3 is used for scl and sda but cant use uart 4 and 5.

Suggested solution(s)

I think there is something wrong with output mapping

Additional context

https://pastebin.com/MDszQVYQ

  • FC Board name and vendor: Vendor Iflight, board name F7 TwingG BT
  • INAV version string: INAV/IFLIGHTF7_TWING 7.0.0 Dec 5 2023 / 10:05:11 (895a4f31) # GCC-10.3.1 20210824 (release)

JustNoLimit avatar Dec 07 '23 16:12 JustNoLimit

checked the target file and I see no assignment conflict on first glance. can you try with 7.1 and 6.1.1 if anything changes? anyone has the same FC and can validate? Maybe a hardware fault.

b14ckyy avatar Mar 22 '24 18:03 b14ckyy