Dshot150 not working with Matek 411wse

[ridgeracer]

PLEASE MAKE SURE YOU READ AND UNDERSTAND THE SOCIAL MEDIA SUPPORT CHANNELS. QUESTIONS ABOUT FLASHING, CONFIGURING, PILOTING MAY BE CLOSED WITHOUT FURTHER INTERACTION.

• Telegram channel
• Facebook group
• RC Groups thread

Please double-check that nobody reported the issue before by using search in this bug tracker.

PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT

---

Current Behavior

Running Inav 5.0 with 2 escs/motors when I set the motor protocol to dshot150 my esc/motor don’t work. When I set the protocol to dshot300 both work correctly. Using Racerstar 30amp esc with JESC fw non bidirectional dshot 48khz.

Steps to Reproduce

1. Select 2 motor outputs
2. Select 4 servo airplane with tail
3. V tail mixer
4. Select dshot 150 motor protocol.

Expected behavior

Throttle commands read by esc. Normal startup tones.

Suggested solution(s)

Dshot 300 works correctly.

Additional context

---

• FC Board name and vendor: Matek 411 wse w BMP280 baro
• INAV version string: 5.0