iNavFlight
'Adsb Warning Message' does not show in OSD yet 'Adsb Info'
Steps to Reproduce
- MSP Display port configured on UART3 115200
- Add both 'Adsb Warning Message' and 'Adsb Info' to OSD (lots of other stuff too and all work but tried with default FW same result)
- DJIWTF Video format
- using ADSBee 1090 fed into UART
- DJI goggles V1 with Air Unit
Everything works perfect even 'Adsb Info' but not 'Adsb Warning Message' does not even show as an element.
- FC Board name and vendor: SpeedyBee F405 v1
- INAV version string:
version
INAV/MATEKF765 8.0.1 Mar 28 2025 / 09:54:31 (ae47bcba)
GCC-13.2.1 20231009
Adsb Warning Message is hidden by default, is displayed only if aicraft reaches the limits:
osd_adsb_distance_warning osd_adsb_distance_alert osd_adsb_ignore_plane_above_me_limit
Did you set correctly these values?
Thank you for the response. I have them set but at lower values. Leaving the 'ignore' at 0 I had the other two set at low values and now changed them to their highest setting so I may evaluate them.
On Sun, Dec 7, 2025 at 10:43 AM error414 @.***> wrote:
error414 left a comment (iNavFlight/inav#11156) https://github.com/iNavFlight/inav/issues/11156#issuecomment-3622337445
Adsb Warning Message is hidden by default, is displayed only if aicraft reaches the limits:
osd_adsb_distance_warning osd_adsb_distance_alert osd_adsb_ignore_plane_above_me_limit
Did you set correctly these values?
— Reply to this email directly, view it on GitHub https://github.com/iNavFlight/inav/issues/11156#issuecomment-3622337445, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARVNZAL5YU4PPPVA5PLWHJL4ARDK3AVCNFSM6AAAAACN27N2RCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTMMRSGMZTONBUGU . You are receiving this because you authored the thread.Message ID: @.***>