iNavFlight
Accelerometer calibration issue, INAV 8.0
PLEASE MAKE SURE YOU READ AND UNDERSTAND THE SOCIAL MEDIA SUPPORT CHANNELS. QUESTIONS ABOUT FLASHING, CONFIGURING, PILOTING MAY BE CLOSED WITHOUT FURTHER INTERACTION.
Please double-check that nobody reported the issue before by using search in this bug tracker. For Bug-Reports, please use the following template and provide as much information as possible. Bug-Reports that don't follow the template, might be closed unanswered. If you are not sure if you found a bug, ask for further input in the community channels or open a Github discussion.
PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT
Current Behavior
I upgraded my flight controller omnibus f4 pro to version 8 framework by INAV CONFIGURATED. After this, the accelerometer of this flight controller has stopped giving correct readings, that is, when I calibrate the accelerometer, it is not getting calibrated. I have tried everything, I even downgraded its framework but still it did not get corrected. Then I thought of flashing the ardupilot framework in it but still the problem was not solved. All these problems came after upgrading the inav version 8 framework. Same problem has happened with my friend also. He also flashed version 8 of inav in Matak f722 wing flight controller and he is facing the same problem. Please solve this because this problem is not getting solved. #11138
Steps to Reproduce
Expected behavior
Suggested solution(s)
Additional context
- FC Board name and vendor:
- INAV version string:
Please show exactly which target you flashed and a picture of exactly which flight controller you have.
Also, please show the first couple lines of the diff you saved before upgrading.
