iNavFlight
Inav 8.0 - 8.0.1 Kakute F4 V2
Hello,
After upgraded from 6.1 to 7.1.2 without issue, the upgrade to 8.0.1 doesn't work at all.
Tested with diff in cli (with the tool to convert 7 to 8) and manually configure the FC
Only internals sensors are working.
External : Baro BMP280 not detected GPS Neo-6M not detected Battery voltage always 0V
I didn't try the receiver.
As everything is fine with 6.1 and 7.1.2, I think the bin is not for the this FC, like it was with INAV 3.0.
Thanks for your help.
Joachim
NEO6M support was removed last year, in INAV 8.
Other than that, please flash with erase and test hardware detection without loading a diff.
As I write, it is already done.
NEo6m is ublox protocol, how it could be removed? Anyway, it doesn't explain why the baro and the voltage monitor are not working.
The 6M was a legacy UBLOX protocol that was deprecated in 2012, when the NEO7M came out.
You won't regret it if you upgrade to an M9 - Ublox has made significant improvements in the last 15 years.