Jumper T15 - Emergency Mode when selecting iNav widget in telemetry setup

[dingrgh]

Description

Jumper T15 (480x320 colour touch screen) EdgeTX 2.10.2 iNav Lua Telemetry 2.2.4

When setting up the telemetry widget on a new model, selecting the iNav widget immediately causes the TX to crash and go into Emergency Mode.

To reproduce

On TX, install LuaTelemetry v2.2.4. In EdgeTX, create a new model. Select Telemetry and add a new screen (full screen with no tabs or trim displays). Then attempt to select iNav as the widget to be used. Boom! Emergency mode. After powering down and up, you are back to a new model with no telemetry screens (other than the default blank one).

This is a new radio so it doesn't appear in the support radio list. If so, then treat this report as a feature request. ;-)

[stronnag]

Supported radio ... didn't think so.

[stronnag]

Can you please try latest master and let me know if it fixes the T15 problem? (#155)

[CCNNCHUN]

I'm using jumper t15 firmware version edgetx2.10.3 lua 2.2.4 and it still doesn't work

[stronnag]

~~I asked you to test master, not 2.2.4~~

Apologies, please test master. It should be fixed by #155

[CCNNCHUN]

~I asked you to test master, not 2.2.4~

Apologies, please test master. It should be fixed by #155

I tested the master and now it works fine, thanks

[stronnag]

Thank you. New release on its way ...