Felix Uhl
Felix Uhl
You'll have to check the [LUFA website](https://www.fourwalledcubicle.com/LUFA.php) and documentation about this. AFAIK, LUFA is exclusively for AVR processors. As the SAMD21 is an ARM processor, you'll probably need to look...
I see! Yeah, this is quite annoying, but I think you're pretty much out of luck here and your best bet is to find different hardware that supports both LUFA...
Did you clone LUFA as a submodule on the specified tag? Or did you clone another version?
Hm, that is very strange. I actually don't have a board with LUFA-Capable MC right now, so I can't test on my end either :/
Could you try to reformat your error output please? It's very hard to read right now. What sketch are you trying to verify? Your own or the example from the...
I'll try to have a look at this within the next week, but can't guarantee anything. Unfortunately, your image isn't helpful to me as not all errors can be seen....
One more thing you could try: Download the .exe installer, install the IDE that way and see if it works then. The Windows Store version is apparently 1.8.33.0, but the...
Ok, I think I'm starting to see what the problem is. Could you please run `deactivate.py` and `activate.py` and post the output of `activate.py` here?
Huh that is very strange indeed, with the reset button there should be no way for LUFA to interfere with the upload. Are you 100% sure the reset button is...
This seems to be related to #14, except that person is using an Arduino Leonardo. I'm starting to suspect the `activate.py` script doesn't hide some file properly. I tried this...