flow-calculator
flow-calculator copied to clipboard
iFallUpHill
I wanted to use this on a 1.2mm and 1.4mm revo highflow nozzle. However for this nozzle and hotend. I had to tweak a few things to make it work.
Hey, I run my second test and raised the amount too 400 and increased the height to 15mm But it wont print it. The starting feedrate is lower then in...
preview:  ico: [favicon.ico.zip](https://github.com/iFallUpHill/flow-calculator/files/11607419/favicon.ico.zip)
Wanted to use this tool to validate my flow rate settings, however the g-code generated does not seem to be valid for BBL lab printers. I'm not certain why that...
It would be nice if we could have templates, that someone had already made for machines. # Phase 1 - Create import/export template functionality - csv/xml/yaml/json (whatever works! 💯) #...
Many (all?) delta configuration printers treat 0,0 as the center of the print area, with coordinates going both negative and positive in X and Y. The tool currently assumes 0,0...
Hey hey, I run the generated gcode on my Snapmaker J1 with dual head. Normaly there is no need for a real dual head because both heads had the same...
I'm using Klipper with an older 8-Bit MKS Gen L board. All of the prints I've sliced have printed fine so far. But when trying to run the G-Code provided...
I think this is a docs issue, and its actually a feature I like. If is set a temperature offset of zero, it just carries on the next row, this...
Adding setting options for printing Z-hights would be nice (for Prime line and Blob). Perhaps in the "Test Configuration" section. When running this flow-test with PCTG filament on my Creality...
