rpi-rgb-led-matrix

rpi-rgb-led-matrix copied to clipboard

128x64 single panel issue of flickering

3

Hi I've using the unilumin 128x64 rgb led display of size 320mmx160mm which is P2.5 and mentioned as 32 scan in the datasheet. I tried the library and i'm facing...

dineshimatrix

Some additional examples

5

Hi, Thanks for the API! I use the LED-matrix in winter for running to work and back home. I fix it to my running rucksack and then it shows several...

jostien

Unknown panel don't work correctly

17

Hello. Unknown panel, resolution 104x52. Chips dp3216+2013ep. Raspberry 1. I just can't configure the image output. The best thing came out in the photo - half the lines at the...

xorkrus

Facing issues with rgb led matrix 64*32 (Chinnese) with Mega 2560

4

I was facing issue with rgb led matrix . I have tried different libraries but not able to resolve the issue. In the given image i was trying to print...

kshitij283

Can I use 4*4 matrix with your mod?

1

Hi! Thanks for your project! Can I connect not 3 rows of matrices, but 4 on your mod? I have already assembled a panel of 16 pieces of 64*32 matrices...

mixeysan

QiangLi P6 48x24 working not correct

6

Hello. I have a QiangLi P6 Outdoor matrix, 48x24 diodes. I connected it according to the instructions in [wiring.md](https://github.com/hzeller/rpi-rgb-led-matrix/blob/master/wiring.md), but it doesn't work properly. The label on the matrix says...

Rpsl

P3 64x64 matrix (P3-32S-HL1.2) missing red on second half of panel

6

Hi, i got a few P3 panels (part no 2PH2962EA1 // [https://de.aliexpress.com/item/1005005727115453.html](https://de.aliexpress.com/item/1005005727115453.html)) and **they do not display red on the second half of the panels** (the side away from the...

zango-me

No output on RPi 3B+ despite working perfectly on RPi Zero 2

2

Hi! I decided to upgrade my LED display and swapped RPi Zero 2 for 3B+. The problem is that there's no output on the latter, the display is dark and...

jakubgawlowski

64x32 Display half off: 16 vs 32 scan mode conflict?

19

Hello, I recently purchased 5 of these modules from ebay ([https://www.ebay.de/itm/285579711444](https://www.ebay.de/itm/285579711444)) and I can only get one half of the display to light up when I run the demos. I...

acastles91

64x64 LED panel 1/16 scan requires new multiplex-mappers

11

Hi, I recently purchased a P2.5 64x64 outdoor LED Panel https://www.aliexpress.com/item/1005005908894934.html and the led-multiplexing doesn't seem to work for the 1/16 Scan. I have an indoor P3 64x64 1/32 Scan...

martodg